Signals by Spreadsheet Products

TOO/4 (Train Order Operator System)

Sat, 04 Sep 2010 23:11:53 -0500

2 Independent Operator Stations
4 Optically-Detected OS Points per Operator
Sounds Alarm (Buzzer) and Illuminates Corresponding LED When OS is Tripped
LED Stays Illuminated Until "Reset" Pushed
"Cut Out" Eliminates Nuisance Trips During Switching at OS Point
Powered by DCC Track Bus or 12VDC Power Supply (Not Provided)

TOO/4 Custom Panel Kit

Sat, 04 Sep 2010 23:11:53 -0500

Power LED (Green) and 4 Station LEDs (Red)
4 Pushbuttons
4 Toggle Switches
4 Photo-transistors
1 Buzzer
Downloadable (Free) PowerPoint Panel Layout

DIO/N26 (Distributed I/O for North Coast Engineering)

Sat, 04 Sep 2010 23:11:53 -0500

26 Input or Output Terminals
Each Terminal Independently Configured as Input or Output
Communicates with computer via NCE® Cab Bus
Works in Conjunction with SBS Software
5VDC Logic Inputs/Outputs
Can Drive Signal LED's Directly (with Series Resistor)

FL2 (Dual Signal Flasher Unit)

Sat, 04 Sep 2010 23:11:53 -0500

Powered by 12VDC (from DIO Card)
5VDC Logic Inputs (from DIO Card)
5VDC Pulsing Output, 0.75 second ON/OFF (adjustable)
Can drive Crossing flasher (no series resistor required)
Can drive railroad signals directly (+5V pulse output)

SD2 (Dual Searchlight Signal Drivers)

Sat, 04 Sep 2010 23:11:53 -0500

For 2-Lead Bi-Color LED Signals ONLY
Powered by 12VDC (from DIO Card)
5VDC Logic Inputs (from DIO Card)
Adjustable Color Balance
No Series Resistors Required

TD8 (8 Tortoise Drivers)

Sat, 04 Sep 2010 23:11:53 -0500

Single Power Input For All 8 Drivers
Each Driver can drive Two Tortoises in Parallel (e.g. Crossover)
Mini-cards (4) can be snapped apart by hand
5VDC Logic inputs from GPDIO Card

DIO/D29 (Distributed I/O for Digitrax LocoNet)

Sat, 04 Sep 2010 23:11:53 -0500

29 Input or Output Terminals
Each Terminal Independently Configured as Input or Output
Communicates with computer via Digitrax LocoNet®
Works in Conjunction with SBS Software
5VDC Logic Inputs/Outputs
Can Drive Signal LED's Directly (with Series Resistor)

AD30 (30 Accessory Decoders)

Sat, 04 Sep 2010 23:11:53 -0500

30 NMRA Compliant Accessory Decoders
No Local (Route) Control (See RCS and STYSC for local/route control)
Works in Conjunction with SBS Software or Independently
5VDC Logic Outputs (Requires Switch Machine Driver [TD8])

STYCS (Staging Yard Control System)

Sat, 04 Sep 2010 23:11:53 -0500

7 NMRA Compliant Accessory Decoders (8 Tracks)
8 Programmable Routes, Locally Activated
Dispatcher (Remote) Lock-out Capability
8 Photo-Detector Inputs (Stops Train Automatically)
Adjustable Departure Time (0-255 seconds)
Works in Conjunction with SBS Software or Independently
5VDC Logic Outputs (Requires Switch Machine Driver [TD8] and Relay)

RCS (Route Control System)

Sat, 04 Sep 2010 23:11:53 -0500

8 NMRA Compliant Accessory Decoders (9 Tracks)
16 Programmable Routes, Locally Activated
Dispatcher (Remote) Lock-out Capability
Works in Conjuction with SBS Software or Independently
5VDC Output, Requires Switch Machine Driver [See TD8]